Ph: 1-800-286-5471

Herman Miller® Ethospace® Frame Connector Parts

Spacer

This spacer joins two frames of equal or unequal heights in a straight line and compensates for dimensional gain in a wall run. It has a cable management side covers and includes attachment hardware.
Part # E1222
3-way 90° Connector

This connector joins three frames of equal or unequal heights at 90° angles and has a cable management side cover. Has a vinyl, fabric or veneer surface. The veneer connector is 1" higher than the vinyl-or fabric covered connector. Part #E1230
3-way 90° Monolithic

This vinyl connector joins three frames of equal or unequal heights at 90° angles. It has standard top cap attachment hardware.
Part # E1231
3-way 120° Connector

This connector joins three frames of equal or unequal heights at a 120° angle. It has a standard top cap and PVC trim piece. Attachment hardware is included.
Part # E1237
4-way 90° Connector

This connector joins four frames of equal or unequal heights at 90° angles and has a standard top cap. Attachment hardware included.
Part #E1240
Available Height: 30",38",46",54",62",70",86"
Connector Attachment Plates

This powered or non powered connector includes attachment plates and a vinyl cover. It joins 2,3, or 4 equal or unequal height frames at a 90° or 180° angles.
Part # E1211
2-way 120° Stacking Connector

This 16" high connector extends the height of a 2-way 120° connector. It also attaches to an adjacent frame. A maximum of two stacking connectors can attach to a connector, the total height cannot exceed 118"
Part # E1227
2-way 135° Stacking Connector

This 16" high connector extends the height of a 28"-54" or 70" high -way 135° connector and can be used with a stacking frame. It also attaches to an adjacent frame. A max of two stacking connectors can attach to a connector; connector height cannot exceed 118" Part # E1221
Spacer Stacking Connector

This 16" high connector extends to the height of a spacer. It also attaches to an adjacent frame. A maximum of two stacking connectors can attach to a connector; the total connector height cannot exceed 118"
Part # E1222.16
3-Way 90° Stacking Connector

This 16" high connector extends the height of a 3-way 90° connector. It also attaches to adjacent frames. A maximum of two stacking connectors can attach to a connector; the total connector height cannot exceed 118"
Part # E1230.16
3-Way 120° Stacking Connector

This 16" high connector extends the height of a 3-way 120° connector. It also attaches to an adjacent frame. A maximum of two stacking connectors can attach to a connector; the total height cannot exceed 118" Part #E1237.16
4-Way 90° Stacking Connector

This 16" high connector extends the height of a 4-way 90° connector. It attaches too adjacent frames. Maximum of two stacking connectors can attach to a connector; total connector height cannot exceed 118". Attachment hardware included.
Part # E1240.16
Stacking Frame Hardware Kit

Kiit is used when attaching a combination frame and stacking frame to an adjacent frame or connector of greater height. Part #E1293 stacking frame to frame 2-way 90° or 135° connector. Part # E1294 stacking frame to spacer or 3-or 4 way 90° connector or 2-way 135° connector
Plate Connectors

This connector extends the height of an attachment-plates connector by 16". Max of 2 stacking connectors can attach to a connector; the total connector height cannot exceed 86". Part #E1211.216-2-way 90° Part #E1211.116 spacer Part #E1211.316-3 way 90° Part #E1211.416 4 way 90°
2-Way 90° Connector Cover

This cover attaches to a 2-way 90° connector of equal height or to a 2-way 90° connector and 1 or 2 stacking connectors. It gas a vinyl or fabric surface. Attachment hardware is included.
Part # E1270
Available Height: 30",38",46",54",62",70",86"
2-Way 90° Connector Cover

This cover attaches to a 2-way 90° connector of equal height or to a 2-way 90° connector and 1 or 2 stacking connectors. It has a vinyl or veneer cover. The veneer cover includes a veneer top cap and is 1" higher than the vinyl cover. Attachment hardware is included.
Part # E1274
Available Height: 30",38",46",54",62",70",86"
120° Connector Cover

This cover attaches to a 2-way 120° connector of equal height or to a 2-way 120° connector and 1 or 2 stacking connectors. It has a vinyl or fabric surface. Attachment hardware is included.
Part # E1277
Available Height: 30",38",46",54",62",70",86"
2-Way 135° Connector Cover

This cover attaches to a 2-way 135° connector of equal height or to a 2-way 135° connector and 1 or 2 stacking connectors. It has a vinyl or fabric surface. Attachment hardware is included.
Part # E1273
Available Height: 38",54",70",86"
Spacer Connector Cover

This cover attaches to a spacer of equal height or to a spacer and 1 or 2 stacking connectors. It has vinyl, fabric or veneer surfaces. The veneer cover includes a veneer top cap and is 1" higher than the vinyl or fabric cover. surface. Attachment hardware is included. Part # E1271
Available Height: 30",38",46",54",62",70",86"
Spacer Cover Monolithic

This vinyl cover attaches to a spacer of equal height or to a spacer and 1 or 2 stacking connectors. Attachment hardware is included.
Part # E1275
Available Height: 30",38",46",54",62",70",86"
3 way 90° cover Monolithic

This cover attaches to a 3-way 90° connector of equal height or to a 3-way 90° connector and 1 or 2 stacking connectors. It has a vinyl, fabric or veneer surface. The veneer cover includes a veneer top cap and is 1" higher than the vinyl or fabric cover surface. Attachment hardware is included. Part # E1272 Available Height: 30",38",46",54",62",70",86"
Connector Cover Tile Height

This 16" high cover attaches to a spacer or a 3-way 180° connector and includes attachment hardware. The cover has a vinyl or fabric surface. The cover with cutouts allow energy and/or cables to pass through the connector.
Part # E1242
Available Height: 30",38",46",54",62",70",86"
Fascia Connection Kit

This kit connects custom millwork fascia to an Ethospace® frame. It includes 24 Z-brackets and attaching screws.
Part # E1247
Crash Rail Bracket

This bracket allows a crash rail to mount to the slots on an Ethospace° frame. 1 bracket is required at each frame connection.
Pkg contains 2
Part # E1290
Finished End

This cover finishes the exposed end of a frame and has an enameled surface. The crown finished end (N) is 3/4" higher than the standard finished (S)
Part # E1250
Available Height: 30",38",46",54",62",70",86"
Finished End Veneer

This 7/8" thick veneer cover finishes the exposed end of a frame. It is 1" higher than a standard finished end.
Part# E1252
Available Height: 30",38",46",54",62",70",86
Finished End Change Height

This cover finishes the exposed end of a frame or connector when joining frames of equal heights. It has enameled or veneer surface. The cover includes hardware to connect a lower frame to a higher frame or connector.
Part # E1251
Available Height: 8",12",16",24",28",32"
More Panel Parts- Connectors | Frames | Electrical |